Thu. Nov 21st, 2024
Occasional Digest - a story for you

AS we enter the colder seasons, homes often become a trap for damp, mould, and condensation. 

This is primarily due to poor ventilation, particularly for those attempting to save on their energy bills by not using their heating.

Experts have revealed a top cleaning hack to help get rid of mould

2

Experts have revealed a top cleaning hack to help get rid of mouldCredit: Getty

And this can be difficult to keep on top of, especially with the rise in energy bills and cost of living crisis. 

But one place that can be really tricky to keep on top of when it comes to mould and damp is the bathroom. 

The bathroom is a haven for mould due to the high levels of moisture and humidity that are typically present.

And activities such as showering and bathing generate steam, and can condense on surfaces like walls, ceilings, and tiles. 

However, bathroom experts at Nuie have revealed a few savvy hacks on how to remove mould in the bathroom and some may surprise you. 

Commercial Director Colm Lalor says: “Keeping grout clean can be a constant battle, plus tiles are prone to the build-up of mould, and both these can quickly make your bathroom walls or floor unsightly.

“The easiest way to remove mould is by dipping an old toothbrush in a solution of one-part bleach to four-parts of water, and then – using a bit of elbow grease – scrub the mould away and rinse with water. 

“Be careful not to scrub too hard, or you may damage the grout.

“To remove mould from walls and surfaces without tiles, use the same solution and gently scrub using a damp cloth until the mould is gone, then dry the area well with a dry, soft cloth.

“We would recommend avoiding the use of bleach on any brassware and only use on white goods such as toilets.”

I bought £500 damp caravan from Facebook – it will be a dream tiny home

We previously revealed some other hacks to tackling mould in the house. 

Nancy Emery, from Drench, explained that for those looking to battle mould without turning their heating on, then start by opening your windows for a start.

Nancy explained: “It may seem counterproductive to open your windows in cold or wet weather, but it is essential to stop mould growth. 

“Cracking open windows a couple of times a day, especially after showering, bathing or cooking, is one of the easiest and most cost-effective ways to help moisture escape.

The cleaning hack involves elbow grease, an old toothbrush, one-part bleach to four-parts of water

2

The cleaning hack involves elbow grease, an old toothbrush, one-part bleach to four-parts of waterCredit: Getty

“Mould thrives in warm and wet environments. 

“So, it is especially important to increase ventilation in the colder months, when prolonged time spent indoors can result in heat building up from our central heating, bodies and breath.”

Common Bathroom Habits That Increase Mould

Plumbworld, a leading expert in bathroom and kitchen products, has shared the daily habits that increase the chance of mould growing in homes.

Leaving wet towels and bathmats on floor 

Wet towels and bathmats on the floors after a shower or bath can increase humidity levels which provides a perfect breeding ground for mould spores.

To prevent this, hang towels and bathmats in an area where they can dry quickly and to wash them regularly.

Not turning on the fan 

An exhaust fan is critical in reducing moisture levels in the bathroom. 

When taking a hot shower or bath, steam increases the room’s humidity level, creating an ideal setting for mould to flourish on walls, ceilings, and other surfaces.

An exhaust fan helps by moving the moist air outside, significantly reducing the risk of mould growth. 

Experts suggest running the fan during the shower and for at least 20-30 minutes afterwards to lower humidity levels.

Ignoring small leaks

Even minor leaks from the sink, toilet, or shower can contribute to increased moisture levels in a bathroom, fostering an environment where mould can thrive. 

Over time, these leaks can cause significant water damage, promoting mould growth in less visible areas such as inside walls or under flooring. 

Fix leaks promptly to prevent mould and potential structural damage.

Keeping shower curtains or doors closed 

Keeping the shower area closed after use traps moisture inside, delaying the drying process and creating a humid environment conducive to mould growth. 

Mould can easily develop on shower curtains, doors, and in tile grout if they remain wet for too long. 

To avoid this, leave the shower door or curtain open after use to improve air circulation and allow the area to dry more quickly.

Storing too many products 

Shower caddies and corners filled with bottles and accessories may seem harmless, but they can obstruct airflow and trap moisture and creates hidden, moist niches where mould can grow unnoticed. 

Keep shampoo and shower gel bottles to a minimum, and regularly clean and dry the areas underneath them to prevent mould growing. 

Source link

Leave a Reply